SKILL LEVEL intermediate
by Dremel ®
Tools & Accessories
124" x 24" - 3/4" Luan Plywood
110 ft - 1/2" x 1" Poplar Stock
112" x 24" - 1/4" Masonite Sheetin
1Tape Measure & Pencil
Let's Get Started
To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.
To begin your project, cut plywood for the marble track back to 20" x 22" using your Dremel Ultra-Saw and smooth the edges & corners with your Dremel Multi-Max.
Next, cut your Poplar for the marble track to the following lengths and quantities: • 1 - 22" inches long • 2 - 18" • 2 - 14" • 1 - 13" (catch basin) • 2 - 9" • 1 - 6" • 3 - 4" Then, rip Masonite in 1" strips & cut to the length of the Poplar strips you just made. Measure & cut Poplar "stops" for the channel & basin ends. Next, assemble the masonite sides to the poplar base and add the poplar stop to one end as shown using wood glue.
Layout assembled channels & catch basin.
Next, you can paint/finish your plywood back, we painted ours red(optional). Then, create your pattern for the run. You can use ours as a template or make your own. Secure the channels & catch basin to the plywood. We used a combination of glue for some & nails/screws (from the back) for others. This allowed us to make adjustments for ball speed. Hang on the wall and enjoy.
A TOOL THAT CAN DO IT ALL
Experience Dremel's most powerful oscillating tool. Featuring 7.0 amps of power and 2 new, powerful cutting blades, the Dremel Velocity is the only tool you need.
TOUR THE MAKER GALLERY
Explore the creations added to the Maker Gallery by Dremel Makers.